Saturday , 3 December 2016
Breaking News
Home » Internet » Learning To Make Fiber Optic Connectors Installation Quickly
Fiber optic is described as a technology which utilizes glass threads for transferring data. Fiber optic cables include a bundle of glass threads in which each of them is able to send messages that modulated onto light waves. By making use of this equipment, you can transmit your data electronically.

Learning To Make Fiber Optic Connectors Installation Quickly

Fiber optic is described as a technology which utilizes glass threads for transferring data. Fiber optic cables include a bundle of glass threads in which each of them is able to send messages that modulated onto light waves. By making use of this equipment, you can transmit your data electronically.

Moreover, fiber optic cables have been instrumental to enhance the technological communication. Today, you can find that fiber optics can stretch across the oceans and carry the internet connection to remote the areas. They can provide extra reliable services for the land-line phones than the traditional wires.

If you need to learn about the installation of fiber optic connectors, you have come to the right corner. At this time, this article is going to give you some instructions that you can follow for the installation process. Thus, just take a look at the following information.

The first thing that you need to do is to remove the plastic jacket at the end of your fiber optic cable. The optic cable ends have jackets for avoiding any destruction in the shipping from the manufacturer. And then, you have to clamp the plastic jacket by using fiber optic stripper tools which have specified slot to fit the size of the fiber optic jacket. Then, you should squeeze the stripper handles such as the pliers. You have to pull away the jacket from fiber optic cable.

The second thing that you have to do is to open the back chamber of the epoxy glue gun which can be done by twisting off the back cap. And then, you need to insert the epoxy glue tube into the chamber and then squeeze gently. In this step, you will require a few ounces of the glue for the task. After that, you should screw the cap back on the epoxy glue gun chamber.

The third thing is to inject the epoxy glue into the socket of fiber optic connectors. Each connector has two sockets on each side of it to make the connection. Furthermore, you need to insert the glue gun to the connector socket. In order to insert the glue, you should press and hold the trigger. The glue spot must not be bigger than an eye pupil.

The fourth thing is to put one fiber optic end to the sockets of the connector. You need to hold the cable in the socket and then count to 10. Then, you must let go of the fiber optic cable and connector. Be sure that the cable stays in position when you let go of it.

Finally, you must place the fiber optic connection to the epoxy curing oven. The oven must be switched on and the timer knob should be turned to six minutes. In this process, the fiber optic connectors which attached to the cable into one of the curing oven slots should be inserted. Then, you must press on the start button on the oven and pull out the connector from oven slot. In order to understand the stability, the connector end should be wiggled. When you find that it is weak, you can try to reinsert the connector to the oven and you need to cook it for only some more minutes.

By checking out the information about optic connectors, you can find other equipment related to fiber patch cables. This will assist you to find the more info you are looking for.

About Emma G.

Working in the marketing industry since 2002. This blog is one of my hobbies.

Leave a Reply