Projector can become a great investment, particularly for people who would like to enjoy watching movie on the big screen without having to be disturbed by the crowds of people just like when watching movie on the cinema. Besides, projector can be very useful for teachers every time they require a big screen to describe their materials in front of the class.
If you use your projector continually, you will have to make replacement on your projector lamp. The work of projector lamp can influence the work of other machines. Thus, if you find that your projector lamp is dead, you should change it to help you use your projector again. In changing the lamp, you must be sure that you select the appropriate type of projector replacement lamp.
The home theater and business projectors are generally using a high-powered lamp for illuminating and projecting the picture on to the screen. The lamp comes with a limited lifespan which is measured in the usage hours. A projector lamp generally lasts about 3,000 hours before you must replace it. When you run the projector for hours, you can hit that number rapidly. Fortunately, almost projectors are designed with the simple replacement to help you easily replace the lamp by yourself. At this time, this article is going to give some good info about the instructions of projector lamp replacement. So, just check out the information and facts below.
The first thing that you must do is to switch off your projector. Then, you must wait a full minute so that you can unplug the projector. After that, you must let it cool for at least an hour before you begin the lamp replacement. You should place towel on the flat surface. Now, you can flip the projector over and put its top gently on the towel.
The second thing is to loosen the screw of lamp cover by using screwdriver. The screw can sometimes be loosened, but it is not removed. However, this might be different in some projectors. Then, you can remove the cover of the lamp and loosen the two lamp module screws. They can also be loosened, but not removed.
The third thing you must do is to eliminate your old lamp module. It can be done by pulling on its handle or grip. After that, start inserting the new lamp module. This will easily slide into the socket. Now, you can tighten the screws of the two lamp modules.
The fourth thing is to reattach the cover of the lamp and tighten the screw. Next, you need to flip over the projector. You need to plug it into your surge protector that plugged into the working electrical outlet. Make certain that the projector is perfectly ventilated. Finally, you can turn the projector on and use the menu to reset the lamp hours to zero.
For your concern, BRAVIA Projector Replacement Lamp is among the very best options to choose. This LMP-H201 is the replacement lamp for your VPL-HW10 or VPL-VW70 BRAVIA 1080p home cinema projector. It is a 1.1mm short arc Ultra High Pressure lamp with a compact reflector.
For more information about replacing projector lamp, you should check out the review about projector replacement lamps that will help you to get better understanding about it. Besides, looking at BenQ projector lamps may also help you to meet your needs.