Performing hardware computer repair and periodic maintenance is a sure way to keep a PC running smooth for years. The methods involved in this process include cleaning the system, replacing any parts that fail and creating a routine to provide upkeep on a regular basis. Some of the components that can fail include memory, hard drives, video cards, motherboards and case fans.
Internal components are known to last for a very long time if properly maintained and this means regular cleanings. Another way of maintaining a PC is keeping the hard drives defragmented by using the tools available in the operating system. Keeping the hard drive maintained will reduce the chances of it failing and causing repairs to be necessary.
Prior to performing any repairs remember to unplug the power from the system first before opening it. Memory is very easy to replace and can be done by following a few easy steps. To remove the memory press down on the clips on either end to release the module and pull it free, next take it to an electronics store to get a replacement.
Hard drives are bound to fail at some time or another and replacing them is actually quite easy. To replace the device, power wires and the cables must be removed by gently wiggling them loose. Once the cables are loose the screws are removed next and the drive is extracted from the case.
Another component that will eventually fail is the motherboard, since these items are a bit tricky to replace it is best to have someone who is experienced perform the repairs. Video cards are a lot less tricky and usually are installed with a single screw. If the card is an AGP model it will have an additional connector in the rear that needs to be released in order to properly remove it.
Case fans are also easy to replace and are done with a screw driver as well, in order to replace the fan the power must be unplugged from it first. This is done by locating the wires that connect the fan and power supply. Once unplugged, use the screw driver to remove the screws holding the fan in place and take it out of the case. To install the new one, replace the screws and plug it back into the power supply then turn on the system to make sure the fan is working.
Ensuring the system kept clean can make not only prolong its life cycle but it can also keep the system running smoothly. Setting a schedule to clean the case out at least one time a month with an air canister or air compressor is an ideal practice to keep. In addition to cleaning out dust and debris from the case it is recommended to run weekly virus scans and also run the defragment program that is standard in the operating system. This will ensure the operating system and hard drive stays healthy and will continue to work with minimal problems. If you need Mac Repairs in the UK, check out: http://www.macrepairleeds.co.uk/
Keeping up to date on hardware Computer repair and periodic maintenance is sure to help the system stay running in top condition. A PC is like a car and requires routine checkups and routine steps to properly maintain the working parts. Putting time and effort into processes such as these will help the PC to continue running the best it can.